JBL Control 5™

JBL Control 5™
6.5" Two-Way


Key Features

• Sensitivity: 89 dB SPL, 1 W, 1 m (3.3 ft).
  
• High power handling (175 W pink noise) with integral protection circuit network.
  
• Molded enclosure with shielded magnet structure.
  
• Components:165 mm (6.5 in) low frequency loudspeaker. 25 mm (1 in) pure titanium dome tweeter.
  
• Optional mounting hardware available in two colors: black and white.

Specifications

Frequency Range (± 3 dB)	:	75 Hz to 20 kHz
Power Capacity	:	I75 W
Sensitivity)	:	89 dB SPL, 1 W, 1 m (3.3 ft)
Directivity Factor (Q):	:	2.8
Directivity Index (DI):	:	4.5
System Sensitivity (dB-SPL, 1W @ 1m)	:	30 Hz – 150 Hz: 1 cabinet: 102 dB 2 cabinets: 104 dB 4 cabinets: 107 dB|
Nominal Impedance		4 ohms
Crossover Frequency		3 kHz
Polarity		Positive Voltage to + terminal causes outward low frequency cone motion,
Enclosure Material		Polypropylene structural foam
Finish		Black or white
Dimensions::		387 H x 251 W x 229 mm D 15.25 H x 9.875 W x 9 in D
Net Weight (each):		4.5 kg (10 lb)
MTC-51 Wall Mount Bracket:		Allows the Control 5 to be mounted to any rigid vertical surface with a unique polymer ball and clamp design, In addition to omnidirectional movement about the ball, the speaker’s connecting wires may be run internal to the clamp. Optional colors.
MTC-52 Ceiling Mount Bracket::		The same as the MTC-51 except that it is designed to be
Rack Mount Bracket:		Allows the Control to be mounted in a standard 19 in EIA equipment rack, with accommodation for vertical adjustment.
Tripod Mounting Adapter:		Allows the Control 5 to be mounted to the JBLMT4612 aluminum tripod in either a vertical or horizontal position.
MTC-56 Wall Mount Bracket:		Low cost, fixed angle wall mount bracket with safety chain,
Note::		Accessory attachment points on rear of the enclosure are .25 x 20 in threaded brass bushings,