Studiophile BX5a
5” Kevlar drivers
Top Features
two-way magnetically shielded studio reference monitors
70 watts of distributed power
5” Kevlar low-frequency drivers
1” natural silk high-frequency drivers
XLR balanced and 1/4” balanced/unbalanced inputs
The BX5a refines our highly acclaimed BX5 near-field reference monitors, renowned for packing a lot of punch for their size. Our new 5” low-frequency driver cones are crafted from Kevlar, an extremely resilient material typically found in much more expensive monitors. Curved cone design coupled with high-temperature voice coils and damped rubber surrounds deliver incredible fidelity and durability. The 1” high-frequency drivers’ magnetically shielded natural silk domes produce crisp top end while still being gentle on the ears. Integral cabinet and electronic engineering work together to deliver improved bass response. 70-watt bi-amped power and expertly tuned crossovers round out an incredible sounding pair of reference monitors with a footprint small enough to fit just about anywhere.
Kevlar drivers
M-Audio's new BX5a employs Kevlar for low-frequency driver construction. The same material used in bulletproof vests, Kevlar's high resilience makes it ideal for use in speaker cones—although it is typically reserved for monitors with higher price tags than the BX5a. Needless to say, Kevlar represents a significant improvement over the polypropylene and paper used in most monitors for this price.
Magnetically shielded for desktop use
Unchecked, the electromagnetic waves emanating from your speakers can wreak havoc with your computer's video monitor or a nearby TV. The BX5a is magnetically shielded so that all of your electronic equipment can coexist on your desktop without interference.
Bi-amplified efficiency
Active monitors have a distinct advantage over unpowered monitors, in that the built-in power amps are designed specifically to work with the drivers and crossovers in a tuned system. Bi-amplification further refines the concept by dedicating separate power amps to the highs and lows. Combined with a finely tuned crossover, this design insures that both the high- and low-frequency drivers are asked to deliver only the frequencies they are more efficient at reproducing.
Full Features
two-way studio reference monitors
70 watts of distributed power (30w HF amp, 40w LF amp)
5” low-frequency drivers with:
• curved Kevlar cones
• high-temperature voice coils
• damped rubber surround
1” natural silk high-frequency drivers
magnetically shielded
XLR balanced and 1/4” balanced/unbalanced inputs
power indicator
volume control
Specifications
| frequency response: | 56Hz-22kHz |
 | |
| crossover frequency: | 3kHz |
| |
| crossover filter network: | 4th-order Linkwitz-Riley |
| |
| amplifier type: | class AB monolithic |
| |
| low-frequency amplifier power: | 40 watts RMS into 4 ohms (woofer) at 0.5% (-46 dB) THD |
| |
| high-frequency amplifier power: | 30 watts RMS into 6 ohms (tweeter) at 0.5% (-46 dB) THD |
| |
| signal-to-noise: | > 100dB (typical A-weighted) |
| |
| polarity: | positive signal at + input produces outward LF cone displacement |
| |
| input impedance: | 20k Ohms balanced, 10k Ohms unbalanced |
| |
| input sensitivity: | 85mV pink noise input produces 90dBA output SPL at one meter with volume control at maximum |
| |
| power: | factory programmed for either 115V ~50/60Hz, 230V~50/60Hz or 100V~50/60Hz; |
| |
| protection: | RF interference, output current limiting, over temperature, turn-on/off transient, subsonic filter, external mains fuse |
| |
| cabinet: | vinyl laminated MDF (enclosure natural Helmholtz resonance frequency: 40 Hz) |
| |
| size: | 250 mm (H) x 176 mm (W) x 200 mm (D) |
| |
| weight: | 5.0 kg/unit - 11.02 lbs/unit |
No comments:
Post a Comment